The OF 2200 Router features a Triple Bearing Design which dampens spindle and bit deflection. With bearings at the top, middle and bottom, the spindle is less likely to wobble. This is particularly important considering the sheer power of the OF 2200 and the centrifugal forces exerted with spinning large bits at speeds up to 22,000 RPM.

Variable speed control

Use the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application. An onboard cross reference guide shows the spindle RPM for each setting. The OF 2200 employs Multi Material Control (MMC) electronics to ensure constant speed under load. That means that the speed of the bit is constant as you plunge and move through the workpiece.

Locking Depth Stop Rod

The Locking Depth Stop Rod allows you save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four position depth stop turret in a single step. Dial the micro adjustment knob in increments of 1/256in (1/10mm) for the ultimate plunge depth precision.

Single Tool Ratcheting Collet

Bit changes have never been easier. Use the spindle locking lever to disengage spindle movement and loosen the collet with a ratcheting motion. The ingenious retractable 360 degree dust shroud and wide plunge column spacing enables open access to the collet.

1/2in Collet

The 1/2in collet of the OF 2200 allows you to take full advantage of its 2200 Watts of power. With an opening of 3 3/8 on the standard base, the OF 2200 can take advantage of a full assortment of router bits.

Retractable, Spring Loaded 360 degree Dust Shroud

Work smarter with the Retractable, Spring Loaded 360 degree Dust Shroud of the OF 2200. The shroud maximizes dust extraction while providing high visibility of the workpiece. Release the dust shroud using a release lever at your fingertips. The shroud retracts back into the locked position after the router is fully plunged.