| SKU :
576119
FESTOOL 576119 TS 75 EQ-F-Plus-FS Track Saw
FESTOOL 576119 TS 75 EQ-F-Plus-FS Track Saw est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.
1x 495380 HW 210X2,4X30 W36 Saw Blade
1x splinterguard
1x hex key 5 mm
1x 203925 SJO 16 AWG-4 plug it-Power Cord
1x 491503 FS 1900/2 Guide Rail FS
1x 204845 SYS3 M 437 Systainer³
When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
Specifications
| Specifications and Details | |
|---|---|
| Idle engine speed | 1,350 - 4,400 RPM |
| Cable length | 4.00 m |
| Min. dust extraction connection dia. | 1.06 in |
| Saw blade diameter | 8-1/4” (210 mm) |
| Drive type | 120 VAC |
| Cutting depth at 45° | 2-1/8” (55 mm) |
| Dust extraction connection dia. | 1-1/16" / 1-7/16" (27 / 36 mm) |
| Power consumption | 1,600 watt |
| Cutting depth | 0" - 3” (0 - 75 mm) |
| Angular range | 0 - 47 ° |
| Cable length (ft) | 13.12 ft |
| Cable length (metric) | 13.123 ft (4 m) |
FESTOOL 576119 TS 75 EQ-F-Plus-FS Track Saw
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.