Milwaukee 6880 10 Gauge Nibbler
Earn [points_amount] when you buy this item.
Milwaukee 6880 10 Gauge Nibbler est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
Description
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. A 1.65 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6880 is our heaviest nibbler with 10 gauge capacity in steel and 12 gauge into stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
features:
4.0 amp, 1,000 SPM
Cuts up to 8.75 ft. per minute
1.65 in. starting hole required
AC-DC toggle switch allows for two-handed operation
Specifications
| Specification | Details |
|---|---|
| Amps | 4 |
| Cord Type | 8' Fixed |
| Tool Warranty | 5 Years |
| Power Source | Corded |
| Length | 12-1/4" |
| Trigger Lock | On Off |
| Capacity in Steel | 10ga |
| Construction Type | Double Insulated |
| Minimum Cutting Radius | 2 and 1-2 Inch |
| Capacity in Stainless | 12ga |
| Starting Hole | 1 and 2 3rd Inch |
| Voltage | 120 AC/DC |
Milwaukee 6880 10 Gauge Nibbler
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. A 1.65 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6880 is our heaviest nibbler with 10 gauge capacity in steel and 12 gauge into stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.